Pubrication

高分子工学研究室

Home

Publication

About

Member

Research

Event

Contact

Link

Publication

<2014>
1. H. Ikake, Y. Osawa, Y. Koide, M. Takada, Y. Muroga, K. Kurita, S. Shimizu “Preparation and microstructure of poly(lactic acid) stereocomplex/silica nanohybrid materials” Koubunshi Ronbunshu, 71(12), 637-643 (2014). 2. K. Nam, T. Iwata, T. Kimura, H. Ikake, S. Shimizu, T. Masuzawa, A. Kishida “Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device” J. Appl. Polym. Sci., 131(20), 40885/1-40885/8 (2014). 3. A. Wada, S. Hara, H. Osada “Ribosome display and photo-crosslinking techniques for in vitro identification of target proteins of bioactive small molecules” Anal. Chem., 86(14), 6768-6773 (2014). 4. Y. Koide, H. Ikake, Y. Muroga, S. Shimizu “Relationship between transparency and morphology of cast films composed of a mixture of poly-D-lactic acid and poly-L-lactic acid” Koubunshi Ronbunshu, 71(1), 47-51 (2014). <2013>
1. Y. Koide, H. Ikake, Y. Muroga, S. Shimizu “Effect of the cast-solvent on the morphology of cast films formed with a mixture of stereoisomeric poly(lactic acids)” Polym. J., 45, 645-650 (2013). 2. K. Nam, K. Yamamoto, K. Kasahara, T. Kimura, S. Funamoto, S. Shimizu, T. Higami, T. Masuzawa, A. Kishida “Fundamental study on the development of a surgical device for polymer-tissue adhesion using vibration damping of polymeric materials” J. Appl. Polym. Sci., 130(4), 2532-2537 (2013). <2011>
1. W. Wang, S. Hara, M. Liu, T. Aigaki, S. Shimizu, Y. Ito “Polypeptide aptamer selection using a stabilized ribosome display” J. Biosci. Bioeng., 112(5), 515-517 (2011). <2010>
1. S. Shimizu, Y. Muroga, S. Iida, M. Miyahara, M. Ishibashi, H. Ikake, K. Kurita "SAXS studies on added-salt species dependence of conformation of fully-charged poly(L-glutamate) in aqueous solutions” J. Phys.: Conf. Ser., 247, 012045 (2010). 2. A.Saito, T. Konno, H. Ikake, K. Kurita, K. Ishihara "Control of cell function on a phospholipid polymer having phenylboronic acid moiety” Biomed. Mater., 5(5), 054101/1-054101/7 (2010). 3. H. Ikake, C. Tamashige, S. Shimizu, Y. Muroga, K. Kurita "Microstructure of poly(carbonate diol)/titania hybrid materials prepared with different chemical structure of poly(carbonate diols)” Kobunshi Ronbunshu, 67(7), 381-389 (2010). 4. T. I. Son, M. Sakuragi, S. Takahashi, S. Obuse, J. Kang, M. Fujishiro, H. Matsushita, J. Gong, S. Shimizu, Y. Yoshida, K. Suzuki, T. Yamamoto, M. Nakamura, Y. Ito “Visible light-induced crosslinkable gelation” Acta Biomater., 6, 4005-4010 (2010). 5. A.Saito, T. Konno, H. Ikake, K. Kurita, K. Ishihara "Glycoprotein recognition for cell capturing on artificial lectin surface” Trans. Mater. Res. Soc. Jpn., 35(1), 127-130 (2010). <2009>
1. A. Shibata, H. Abe, M. Ito, Y. Kondo, S. Shimizu, K. Aikawa, Y. Ito “DNA templated nucleophilic aromatic substitution reactions for fluorogenic sensing of oligonucleotides” Chem. Commun., 43, 6586-6588 (2009). <2008>
1. M. Matsuno, Y. Nagasaka, K. Kurita, T. Serizawa “A polymer platform composed of structurally well-defined stereocomplex structures for efficient enzymatic reactions” Trans. Mater. Res. Soc. Jpn., 33(3), 743-746 (2008). 2. N. Morimoto, T. Ohki, K. Kurita, K. Akiyoshi “Thermo-responsive hydrogels with nanodomains: rapid shrinking of a nanogel-crosslinking hydrogel of poly(N-isopropyl acrylamide)” Macromol. Rapid Comm., 29 (8), 672-676 (2008). <2007>
1. H. Matsuno, Y. Nagasaka, K. Kurita, T. Serizawa “Protein adsorption is dependent on substrate polymer polymorphs” Chem. Lett., 36(10), 1238-1239 (2007). 2. T. Serizawa, K. Iida, H. Matsuno, K. Kurita “Cellulose-binding heptapeptides identified by phage display methods” Chem. Lett., 36(8), 988-989 (2007). 3. Y. Iwasaki, U. Takami, Y. Shinohara, K. Kurita, K. Akiyoshi “Selective Biorecognition and Preservation of Cell Function on Carbohydrate-Immobilized Phosphorylcholine Polymers” Biomacromolecules, 8(9), 2788-2794 (2007). 4. S. Shimizu, Y. Muroga, T. Hyono, K. Kurita “Small-angle X-ray scattering study on conformation of poly(sodium L-glutamate) in NaCl and NaF aqueous solutions” J. Appl. Crystallogr., 40(S1), s553-s557 (2007). 5. Y. Muroga, Y. Sano, H. Tagawa, S. Shimizu “Studies on the Conformation of a Polyelectrolyte in Solution: Local Conformation of Cucumber Green Mottle Mosaic Virus RNA Compared with Tobacco Mosaic Virus RNA” J. Phys. Chem. B, 111(29), 8619-8625 (2007). 6. H. Matsuno, Y. Nagasaka, K. Kurita, T. Serizawa “Superior Activities of Enzymes Physically Immobilized on Structurally Regular Poly(methyl methacrylate) Surfaces” Chem. Mater., 19(9), 2174-2179 (2007). 7. T. Serizawa, Y. Nagasaka, H. Matsuno, M. Shimoyama, K. Kurita “A Stereocomplex Platform Efficiently Detecting Antigen-Antibody Interactions” Bioconjugate Chem., 18(2), 355-362 (2007). 8. Y. Ito, M. Heydari, A. Hashimoto, T. Konno, A. Hirasawa, S. Hori, K. Kurita, A. Nakajima “The Movement of a Water Droplet on a Gradient Surface Prepared by Photodegradation” Langmuir, 23(4), 1845-1850 (2007). <2006>
1. K. Yada, S. Tanaka, H. Ikake, S. Shimizu, K. Kurita “Preparation and physical properties of polypropylene glycol/titania hybrid materials” Koubunshi Ronbunshu, 63(11), 727-736 (2006). 2. M. Shibaike, J. Yokoyama, H. Ikake, S. Shimizu, K. Kurita, Y. Shimizu, K. Suzuki “Synthesis and physical properties of poly(Disperse Red 1 acrylate-co-butyl methacrylate)” Kobunshi Ronbunshu, 63(9), 621-625 (2006). 3. T. Serizawa, K. Iida, H. Matsuno, K. Kurita “Prolonged degradation of end-capped polyelectrolyte multilayer films” Polym. Bull., 57(3), 407-413 (2006). 4. Y. Muroga, K. Hayashi, M. Fukunaga, T. Kato, S. Shimizu, K. Kurita “Change of the persistence lengths in the conformational transitions of pullulan- and amylose-tricarbanilates” Biophys. Chem., 121(2), 96-104 (2006). <2005>
1. T. Konno, K. Akita, K. Kurita, Y. Ito “Formation of embryoid bodies by mouse embryonic stem cells on plastic surfaces” J. Biosci. Bioeng., 100(1), 88-93 (2005). 2. S. M. Nomura, Y. Mizutani, K. Kurita, A. Watanabe, K. Akiyoshi “Changes in the morphology of cell-size liposomes in the presence of cholesterol: Formation of neuron-like tubes and liposome networks” BBA-Biomembranes, 1669 (2), 164-169 (2005). 3. Y. Iwasaki, E. Tabata, K. Kurita, K. Akiyoshi “Selective cell attachment to a biomimetic polymer surface through the recognition of cell-surface tags” Bioconjugete Chem., 16(3), 567-575 (2005). 4. S. Yano, T. Ito, K. Shinoda, H. Ikake, T. Hagiwara, T. Sawaguchi, K. Kurita, M. Seno “Properties and microstructures of epoxy resin/TiO2 and SiO2 hybrids” Polym. Int., 54(2), 354-361 (2005). <2004>
1. Y. Muroga, S. Iida, S. Shimizu, H. Ikake, K. Kurita “Conformation of poly(sodium ethacrylate) in solution studied by small-angle X-ray scattering” Biophys. Chem., 110(1-2), 49-58 (2004). <2003>
1. T. Ito, S. Ishibashi, K. Kurita, S. Yano, M. Seno “Curing of epoxy resin with alkoxysilyl-containing amines” Network Polymer, 24(4), 235-239 (2003). 2. T. Ito, S. Ishibashi, H. Ikake, T. Hagiwara, T. Sawaguchi, K. Kurita, M. Seno, S. Yano “Preparation and properties of sol-gel derived epoxy resin/titania hybrids” Koubunshi Ronbunshu, 60(9), 490-498 (2003). 3. T. Ito, S. Ishibashi,K. Iwasaki, S. Yano, T. Takido, K. Kurita, M. Seno “Preparation and properties of polyfunctional epoxy resins and their silica-composite resins” Network Polymer, 24(3), 177-185 (2003). 4. S. Yano, K. Kurita, K. Iwata, T. Furukawa, M. Kodomari “Structure and properties of poly(vinyl alcohol)/tungsten trioxide hybrids” Polymer, 44(12), 3515-3522 (2003). 5. S. Shimizu, T. Seyama, R. Sekine, K. Kurita “Effect of added organic solvent on interaction parameters of poly(N-isopropylacrylamide) in aqueous solution” J. Appl. Crystallogr., 36, 694-697 (2003). 6. A. Yamasaki, Y. Imamura, K. Kurita, Y. Iwasaki, N. Nakabayashi, K. Ishihara “Surface mobility of polymers having phosphorylcholine groups connected with various bridging units and their protein adsorption-resistance properties” Colloid Surface B, 28(1), 53-62 (2003). 7. F. Ikkai, N. Masui, T. Karino, S. Naito, K. Kurita, M. Shibayama “Swelling Behavior and Microstructure of Poly(12-acryloyloxydodecanoic acid-co-acrylic acid) Gels in the Ethanol/Water System” Langmuir, 19(7), 2568-2574 (2003). <2002>
1. Y. Iwasaki, K. Shimakata, N. Morimoto, K. Kurita “Hydrogel-like elastic membrane consisting of semi-interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane” J. Polym. Sci. Pol. Chem., 41(1), 68-75 (2002). 2. T. Karino, N. Masui, M. Hiramatsu, J. Yamaguchi, K. Kurita, S. Naito “Stabilization of hydrophobic domains in hydrogel by intermolecular hydrogen bonds between carboxylic groups at the distal end of alkyl side-chain” Polymer, 43(26), 7467-7475 (2002). 3. H. Ikake, Y. Fukuda, S. Shimizu, K. Kurita, S. Yano “Microstructures of poly(ethylene glycol)/tungsten oxide hybrid films exhibiting photochromic properties” Koubunshi Ronbunshu, 59(10), 608-615 (2002). 4. H. Ikake, W. Hashimoto, M. Kawai, N. Kamiyama, S. Shimizu, K. Kurita, S. Yano “Optical properties and microstructures of poly(tetramethylene oxide)/titania hybrid materials with protection against UV-rays” Koubunshi Ronbunshu, 59(9), 539-547 (2002). 5. Y. Iwasaki, N. Shibata, M. Ninomiya, K. Kurita, N. Nakabayashi, K. Ishihara “Importance of a biofouling-resistant phospholipid polymer to create a heparinized blood-compatible surface” J. Biomat. Sci. Polym. E., 13(3), 323-335 (2002). 6. Y. Iwasaki, S. Uchiyama, K. Kurita, N. Morimoto, N. Nakabayashi “A nonthrombogenic gas-permeable membrane composed of a phospholipid polymer skin film adhered to a polyethylene porous membrane” Biomaterials, 23(16), 3421-3427 (2002). 7. N. Masui, F. Ikkai, T. Karino, S. Naito, S. Kunugi, K. Kurita, M. Shibayama “Small-Angle Neutron Scattering Study on Selective Solvation of Poly(12-acryloyloxydodecanoic acid-co-acrylic acid) Gels in Mixed Solvents” Langmuir, 18(13), 5092-5098 (2002). <2000>
1. S. Yano, K. Iwata, K. Kurita, T. Sawaguchi “Structure and physical properties of sol-gel derived polypropylene glycol/silica hybrid” Koubunshi Ronbunshu, 57(6), 383-388 (2000). 2. H. Ikake, W. Hashimoto, T. Obara, K. Kurita, S. Yano “Photochromic properties and microstructures of poly(tetramethylene oxide)/tungsten trioxide hybrid materials” Koubunshi Ronbunshu, 57(6), 376-382 (2000). 3. S. Shimizu, R. Sekine, K. Kurita “Small-angle X-ray scattering from semi-dilute solutions of poly(N-isopropylacrylamide) in aqueous acetonitrile solutions” J. Appl. Crystallogr., 33, 731-734 (2000).

論文(1977年〜1999年)

1. 伊掛浩輝，栗田公夫「—ガラス代替へ向けた—透明樹脂・フィルムへの木の上性付与と応用技術〜耐熱性・耐候性向上，傷・汚れ対策，屈折率制御とその評価・分析技術〜」第11節“ポリイミド/シリカハイブリッド材料の透明性と耐熱性の両立” 株式会社技術情報協会（2014年11月30日発刊）． 2. 伊掛浩輝，栗田公夫「—光学樹脂，フィルム，コーティング材，ガラス，セラミックスを事例とした—（高・低）屈折率材料の作製と屈折率制御技術〜光学特性（屈折率・透明性・複屈折）の高度化と屈折率調製〜」第４節 “酸化チタンナノ粒子分散技術による光学樹脂の高屈折率化” 株式会社技術情報協会（2014年9月30日発刊）． 3. 伊掛浩輝，栗田公夫「〜260分析事例を解説！〜IR分析テクニック事例集」10章，5節，“全反射型赤外吸収法を用いたポリイミド/シリカハイブリッドフィルムのイミド化率評価” 株式会社技術情報協会（2013年10月21日発刊）． 4. 伊掛浩輝，栗田公夫「コンポジット材料の混練・コンバウンド技術と分散・界面制御フィラー活用技術，配合条件，装置の選定・使い方，分析・評価技術」第11節，第２節， “ナノ粒子分散技術を用いた光学樹脂の高屈折率化” 株式会社技術情報協会（2013年4月26日発刊）． 5. 伊掛浩輝，栗田公夫「次世代自動車（EV・HV）に向けた自動車材料の樹脂化による車体軽量化—新材料開発・加工技術の事例とこれからの展開—」第3節，2節，“紫外線・熱線カット有機無機ハイブリッド材料の特性と自動車窓への応用” 株式会社技術情報協会（2013年2月28日発刊）． 6. 伊掛浩輝，栗田公夫『透明性を損なわないフィルム・コーティング剤への機能性付与〜材料設計，加工プロセス最適化〜』第2章，4節 “ポリイミド/ シリカハイブリッド材料の透明性，耐熱性の両立” 株式会社技術情報協会（2012年11月30日発刊） 7. 伊掛浩輝，栗田公夫「“熱・光・水・汚れ・傷”による透明樹脂の劣化・変色対策とその評価」第2章，第９節，“ポリイミド/シリカハイブリッド材料の透明性・耐熱性の向上” 株式会社技術情報協会（2012年3月30日発刊）． 8. Shuta Hara ,Mingzhe Liu,Wei Wang Muye Xu Zha Li and Yoshihiro ito “Stabilized ribosome display for in vitro selection”,in “Ribosome Display and Related Display Technologies; Methods and Protocols”,”Methods in Molecular Biology”,Ed by Julie Douthwaite and Ron Jackson,Humana Press,Cambridge, p,59-73,(2011).

1. 伊掛浩輝，栗田公夫，清水繁，久保綾子「ポリエチレングリコールと酸化銅(II)とのハイブリッド」特開2006-282984 (2006-10-19). 2. 栗田公夫，内藤幸雄，山口順，小林由佳「鎖状のω－アミノアルキルアクリレート、その製造方法及びこれを用いた保水剤」特開2005-104945 (2005-04-21). 3. 栗田公夫，清水繁「ポリメタクリル酸メチル／ジルコニアハイブリッドフィルム」特開2003-147148 (2003-05-21). 4. 栗田公夫，清水繁，田中景子，塚野美沙子「保水性Ｎ－ビニルアセトアミド／アクリル酸ハイドロゲル」特開2003-147026 (2003-05-21). 5. 栗田公夫「ポリメタクリル酸メチル／チタニアハイブリッド」特開2003-055517 (2003-02-26). 6. 石原一彦，中林宣男，岩崎泰彦，栗田公夫，兼氏友樹「末端官能性ホスホリルコリン類似基含有重合体、製造方法および用途」特開2001-261740 (2001-09-26). 7. 河野秀之，栗田公夫，岩崎泰彦，中林宣男，石原一彦「生体適合性重合体／シリカゲルハイブリッド体およびその製造方法」特開2000-212376 (2000-08-02).